مركز الأخبار
منزل > مركز الأخبار > industry news

Nanyang explosion-proof motor: How to carry out daily maintenance of explosion-proof motors?
2024-09-07 16:00:30

Nanyang explosion-proof motors play a crucial role in industrial production, and daily maintenance is essential to ensure their safe, stable, and efficient operation.

Firstly, visual inspection is an important part of daily maintenance. Regularly inspect the motor casing for cracks, deformation, or corrosion. If any problems are found, they should be repaired or replaced in a timely manner to ensure that the explosion-proof performance of the motor is not affected. At the same time, check whether the junction box of the motor is well sealed, and whether the cables are damaged, aged, etc. If there are any problems, they should be dealt with in a timely manner.

Secondly, cleaning work cannot be ignored. Keeping the surface of the motor clean can prevent the accumulation of impurities such as dust and oil, which can affect the heat dissipation effect of the motor. Use a clean cloth or compressed air to regularly clean the dust and debris on the motor casing, heat sink, and other parts. Please note that during the cleaning process, avoid using a damp cloth or water to directly rinse the motor to avoid damaging its insulation performance.

e55460bfc7vyvydx.jpg

Furthermore, temperature and current monitoring are key steps in daily maintenance. During the operation of the motor, it is important to closely monitor the temperature changes of the motor. The temperature of the motor can be monitored by touching the motor casing or using tools such as infrared thermometers. If the motor temperature is found to be too high, it should be stopped immediately for inspection, and the cause should be identified and dealt with. At the same time, it is necessary to regularly monitor the operating current of the motor to ensure that the current is within the rated range. If the current increases abnormally, it may be due to excessive motor load or malfunction, and the cause should be promptly investigated.

In addition, good ventilation is also an important condition for ensuring the normal operation of explosion-proof motors. Check if the ventilation system of the motor is unobstructed and if the cooling fan is running properly. Ensure that there are no obstacles blocking ventilation around the motor to ensure timely heat dissipation and avoid damage due to overheating.

Finally, perform regular maintenance and upkeep. Regularly conduct comprehensive inspections and maintenance of the motor according to its user manual and maintenance manual. Including replacing lubricating oil, inspecting bearings, cleaning dust inside the motor, etc. At the same time, for explosion-proof motors that have not been used for a long time, a comprehensive inspection and testing should be conducted before they are put back into use to ensure their good performance.

In short, the daily maintenance of Nanyang explosion-proof motors needs to start from multiple aspects such as appearance inspection, cleaning, temperature and current monitoring, ventilation, and regular maintenance. Only by doing a good job in daily maintenance can we ensure the safe and reliable operation of explosion-proof motors and provide stable power support for industrial production.


معلومات الاتصال

عنوان المكتب

sv1.pngمنطقة خنان نانيانغ الجديدة مجموعة صناعة الطاقة الجديدة ذات التقنية العالية

sv2.png+86 13513779000

sv2.png+86 13838711208

sv3.png13513779000@163.com

روابط مفيدة

خريطة الموقع

يبحث

إنتاج الحديد والصلب